A slippery situation September 13, 2018

Sometimes you just gotta rent a remote control tank

When one of the pumps at Hamilton's Wild Waterworks went on the blink, they called Duke to get the kiddies slipping and sliding again. Trouble is, the pumps are buried in the ground in the middle of the park. The one we had to replace was a 75 HP beast that weighed 2,000 lbs. And there was no easy way to get it into the park.

Closeup of multi-coloured water slides at Wild Waterworks in Hamilton

We put the 2,000 lb motor on a remote control mini-"tank" and drove it to the hole in the ground.

So where are the photos, you ask? Why didn't we go live from the park, or at least shoot some video? We hang our heads in shame. Truth is, we were so absorbed in executing Operation Tank that we forgot. Next time—we promise!

Avoid stoppages and long term repair shutdowns with free preventive maintenance guide.

You may also like:

Basic Motor Testing Tools and Methods

Industrial equipment repair

8 Factors That Can Impact Bearing Lubrication in Electric Motors

Putting lithium grease into wheel bearing for ten wheel track by
Emergency? Call Now!

If it makes you puke, call Duke.

If it makes you puke, call Duke.

Certified for safety

easa-the-electro-mechanical-authority-logo-vector
CSA

Certified for safety

easa-the-electro-mechanical-authority-logo-vector
CSA

Terms and Conditions   Copyright © 2016-2021  Duke Electric.   |    Site Design & Development by Human_Code.